Excel advice

Discuss anything related to using the program (eg. triggered betting tactics)

Moderator: 2020vision

Postby mak » Mon Jul 19, 2010 7:59 pm

Apparently something is wrong, because it should be connected If you were trying to connect the second page in the same workbook,can you try with a different workbook?

Also see which version you are using.I think the latest one is here

Version 1.1.0.66x10
http://www.gruss-software.co.uk/Betting ... _Beta2.msi
mak
 
Posts: 1086
Joined: Tue Jun 30, 2009 8:17 am

Postby wine » Tue Jul 20, 2010 4:19 pm

Hi Mak

That's working great from both sheets now. Thanks for the link.

I've tweaked a few of the numbers, and was wondering about the bet size. Is there a way of adjusting the bet size of the selections for a max liability and minimum bet size? eg, if max liablity is 3 and 2 selections are found, it places the bet of 1.50 on each. If only 1 is found, it places a minimum bet of 2.

Thanks for all the help once again.
wine
 
Posts: 16
Joined: Fri Feb 05, 2010 5:36 am

Postby mak » Tue Jul 20, 2010 4:52 pm

i think we could adjust the bet stakes, but you need first to add some more conditions & logic i believe

for the time being bets are placed if price is more or less of some given prices

if for example at the time being you have 1 selection then you need a stake of 2

what if after some seconds it founds one more selection? and after one more?

you need to be more specific...
:)
mak
 
Posts: 1086
Joined: Tue Jun 30, 2009 8:17 am

Postby wine » Tue Jul 20, 2010 5:03 pm

Hi Mak.

Yes you're right once again.

I have moved the monitoring times nearer to the off, however there will be times when prices will drift into the parameters.

Once the first batch is found, if those selections can be divided by max liability, any subsequent selections to be the same amount as the first batch of stakes. eg max. lia. = 3, initial selections = 2. Stake 1.50. Subsequent selections = 1.50.

Is that too complicated?

Best regards
wine
 
Posts: 16
Joined: Fri Feb 05, 2010 5:36 am

Postby mak » Tue Jul 20, 2010 6:33 pm

Again just because there isn't some specific conditions were even the first bet is placed it is difficult (for me at least) to think for a solution.

Something you can do regarding odds & stake is to divide the stakes for a particular profit

for example if back odds are 15 you can place at stake column a formula
= 10/f5 where 10 for example is your target profit before commission

I don't know what you need to achieve or the reasoning of the recommended staking plan in order to suggest something else
mak
 
Posts: 1086
Joined: Tue Jun 30, 2009 8:17 am

Postby mak » Tue Jul 20, 2010 6:36 pm

for example if back odds are 15 you can place at stake column a formula
= 10/f5 where 10 for example is your target profit before commission

place the formula =10/f5 at r5 column & drag down...

*please test whatever me or anyone else suggest because we are human...
mak
 
Posts: 1086
Joined: Tue Jun 30, 2009 8:17 am

Previous

Return to Discussion

Who is online

Users browsing this forum: No registered users and 44 guests

Sports betting software from Gruss Software


The strength of Gruss Software is that it’s been designed by one of you, a frustrated sports punter, and then developed by listening to dozens of like-minded enthusiasts.

Gruss is owned and run by brothers Gary and Mark Russell. Gary discovered Betfair in 2004 and soon realised that using bespoke software to place bets was much more efficient than merely placing them through the website.

Gary built his own software and then enhanced its features after trialling it through other Betfair users and reacting to their improvement ideas, something that still happens today.

He started making a small monthly charge so he could work on it full-time and then recruited Mark to help develop the products and Gruss Software was born.

We think it’s the best of its kind and so do a lot of our customers. But you can never stand still in this game and we’ll continue to improve the software if any more great ideas emerge.