Market Replay not logging all Lay Results

[Jean Luc]

Hi, when looking at historical data (Market Replay) the results will stop logging after a while even though the bets are matched, This only happens for Lay bets and I have tried over several dates. If I load 5 consecutive dates and run it will typically stop logging on day 1.

Bet ref Selection name Bet type Amount Average Odds Result Req Odds Req Stake Matched Odds Matched Stake
1000239 RESULT_NOT_AVAILABLE
1000238 RESULT_NOT_AVAILABLE

Strangely Back bets will log accurately.

Thanks in advance for any feedback.

[GaryRussell]

I will look into this.

[Jean Luc]

Hi Gary,

I've Changed "LAY-SP" to "LAY" and it is now working properly.

When I used "LAY-SP" the bets were matched before the Off (Back Price plus 2 ticks) and so the SP part was irrelevant but somehow prevented the results being recorded.

Thanks for looking into it.

[GaryRussell]

Yes -SP should be irrelevant. I've tried to replicate the issue, but it is working ok. Can you install Version 1.3.2.8d and let me know if still an issue. If it still fails then please let me know which exact dates and markets you used so I can test the same scenario.

[Jean Luc]

Hi,

1st September (2024) UK Greyhounds Place Market (v 1.3.2.6g), Will try earlier version you suggested tonight.

Trigger: =IF($B$3>1000,"LAY-SP","")
Odds; =J5
Stake; 10

It stops logging results after 11.13am. Every other date I try the same error occurs (but sometimes gets to the evening before stopping)


All above dragged down to cover all 6 selections (or less)

Results below show when error occurs (Taxi Joe is in the 11.13am race). The results are fully matched and the Market is closed.

1009279 RESULT_NOT_AVAILABLE
1009278 RESULT_NOT_AVAILABLE
1009277 RESULT_NOT_AVAILABLE
1009276 RESULT_NOT_AVAILABLE
1009275 6. Taxi Joe L 10 3.9869 RESULT_WON 3.9869 10 3.9869 10
1009274 4. Indian Night L 10 2.72606 RESULT_WON 2.72606 10 2.72606 10
1009273 3. Crokers Fluffy L -6.9204 1.73 RESULT_LOST 1.73 9.48 1.73 9.48
1009272 2. Miss Eske L 10 4.5006 RESULT_WON 4.5006 10 4.5006 10

Thank you

[Jean Luc]

Hi Gary,

I have tried Version 1.3.2.8d and still get the same error. It is only on Place Markets when using LAY-SP.

Could you try 5 days consecutive from October 2nd to 6th, UK Greyhound Place Market using "LAY-SP" on 32x and see if it stops logging results for you?

Thank you

[GaryRussell]

I have tested 2nd to 6th October and have loads of RESULT_NOT_AVAILABLE. Please bear with me while I debug it.

[Jean Luc]

Thank you

[GaryRussell]

Please install Version 1.3.2.8f and let me know if ok now.

It also now logs result correctly as CANCELLED if cancelled by user and LAPSED if cancelled because not matched.

[Jean Luc]

Hi Gary,

I've checked on numerous dates and it is working correctly.

When you have time would it be possible to add a tick box for Win and Place on Market Replay when adding races. At the moment it is possible to tick a box and it adds both Win and Place Markets for All races, but if you only want Win or Place you have to tick each box separately. Over 5 Days with many different markets it requires many tick boxes.

Thank you for updating so quickly.

[GaryRussell]

I have added two more check boxes at country level to include either win or place. You don't need to install a new version.

[Jean Luc]

Hi Gary,

The two new check boxes are awesome and make loading data so much easier.

The problem of RESULT_NOT AVAILABLE has reoccurred.

July 4th 2024 Place Markets Only using "LAY-SP" (auto 1 min)

Horses (Place): AUS, UK, US
Greyhounds (Place): AUS, UK

Once it stops logging results it never restarts.

1000204 RESULT_NOT_AVAILABLE
1000203 RESULT_NOT_AVAILABLE
1000202 8. Despicable Toots L -5.9 1.59 RESULT_LOST 1.59 10 1.59 10
1000201 7. Full Pelt L -2.9332 1.29332 RESULT_LOST 1.29332 10 1.29332 10
1000200 6. Prince Sal L 10 3.45 RESULT_WON 3.45 10 3.45 10

Thank you

[GaryRussell]

Sorry, that's the last thing I expected as I found a solid reason while it wasn't working last time. Can you advise is it the same formula as previously and are all markets loaded into one tab page?

[Jean Luc]

All loaded into one tab.

I used the following just to test:

Trigger: =IF($B$3>500,"LAY-SP","WAIT") dragged down to cover 32 selections
Odds: = column L (Lay Odds 3)
Stake = 10

[GaryRussell]

Thanks. I have reproduced the same problem at the same bet reference! I can now fix it. I will get back to you as soon as I can.